Welcome to the world of affordable and uninterrupted energy! SEVA & energyBRICK meets energy demands of all industrial and residential premises!
SEVA - INDOOR GRID-INTEGRATED SOLUTION
SEVA is a fully automated Energy Storage Solution for home and offices, using variable power sources to safely accumulate and effectively distribute electric energy
SEVA can be connected to electric grid, or any other non-conventionally ways of energy generation like solar or wind power supply in order to accumulate sufficient energy from these sources during daytime or on off-peak periods and then power up your house or office when rates are high.
Capacity of SEVA can be worked out to provide required power for houses and industrial buildings of any size and needs of energy consumption.
- 25 000 charge-discharge cycles
- Service life is 15 years
- Automated, compact and simple to install
- Smaller in size against similar products
- Ultra-fast charging and low self-discharge
- Safe in operation and easy maintenance
- Various capacities starting from 3.5kW to any customer needs
- Can be fully discharged with no memory effect
- Gentle appearance and ergonomic design
- INDEPENDENCE FROM UTILIТY
Solar panels, Wind power or Energy-from-waste, combined with SEVA Accumulator gives independence and self-sufficiency for remote residential premises, commercial and industrial buildings from the centralized power network.
- DIGITAL POWER STORAGE
SEVА efficiently accumulates energy during off-peak hours, using conventional electric grid and then distribute it during periods of high electricity demand when rates are high.
- SOURCE OF BACK-UP POWER
SEVA is long-lasting and efficient back-up power source, protecting sensitive industrial equipment and susceptble household appliances from power blackouts and outages.
- LOCAL POWER SUPPLY
Form your own local power network and disconnect your facilities from centralized power system. Turn your home into independent and sustainble accommodation
SEVA is lightweight and compact solution with aesthetically designed panel matching with exterior and interior of any building.
SEVA Accumulator has capacity range starting from 3.5 kWh and scalable to any customer requirements, sufficient to power most of houses during a day. Multiple batteries may be installed together for premises with greater energy needs.
OPEN BROCHURE DOWNLOAD LEAFLET
Pre-orders for SEVA are already open! Don't miss it out and get your SEVA first!
energyBRICK- OUTDOOR ENERGY STORAGE SOLUTION
energyBRICK is an effective backup power source for improvement of grid reliability and integration of renewable energy.
energyBRICK represents several pre-manufactured units or “bricks”, rapidly erected at any required location to form a highly effective storage complex of any size and capacity. The operation of units needs no any auxiliary infrastructure and can easily withstand poor weather conditions such as strong winds, showers, frosts, dust storms etc.
Modular structure allows combining any number of the units into powerful energy storage facilities to optimize a power management system and avert power blackouts and outages. Such facilities can be rapidly deployed at any location and if required disassembled and relocated to meet any energy challenges.
- Low internal resistance value
- Rapid deployment and short
- High efficiency due to lack of
- heat loses
- Modular structure
- Low self-discharge level
- No memory effect – can be fully charged
- Absorbs any short circuit failures
- Ecological safety and high stability level
- Ultra-fast charging using high amperage currents
NEW ERA OF ENERGY TRANSMISSION
energyBRICK is breaking new ground in electrical power transmission as it creates an altogether new logistics schemes of energy distribution. Thanks to modular design the units are not fixed to a specific place and can be relocated to another location if needed by conventional transportation methods i.e.; road or rail. Thanks to low self-discharge level (5% of charge loss per annum), even transportation over long distances will ensure delivery of energy with minimal losses.Standardized weight and size parameters of energyBRICK units allow using standard forklift to load and unload the units to / from any vehicle or platform.
Modular structure allows scaling up the power infinitely by connecting additional energyBRICK units. Commissioning of new units is carried out under normal operating conditions and requires no system shut-down. energyBRICK operation is fully automated and can be remotely monitored by just 1 operator. Replacement of used or faulty “bricks” is incredibly easy: they are simply swapped in a matter of minutes for new ones by a single person, causing no equipment breakdown. energyBRICK is equipped with inverter, allowing connecting the complex to any type of current power sources – traditional grid, solar, wind, and greenBLAZE waste-to-energy processor.
OPEN BROCHURE DOWNLOAD LEAFLET
SEVA & energyBRICK - INTELLIGENT SOLUTIONs FOR SMART PEOPLE!